diagradio.c File Reference

Implementation of the Radio Diagnostics Application. More...

Defines
#define	NL   "\n\r"
#define	TBLINK_PERIOD   (500)
Functions
time_t	blink (timer_arg_t t)
	Life LED timer service routine.
void	help (void)
	Print help for hotkeys.
int	main (void)
	Main function of diagradio application.
void	rdiag_init (void)
void	send_continous (void)
	Send frames permanently (next frame is triggered at TX_END_IRQ).
void	send_frame (uint8_t frmlen)
	Transmit a frame with a given payload length.
void	set_next_cca (void)
	Select CCA Mode.
void	set_next_channel (channel_t chaninc)
void	set_next_channel (int8_t chaninc)
	Increment/decrement channel.
void	set_next_pwr (int8_t pwrinc)
	Increment/decrement TX power.
void	show_statistic (bool reset)
	Display RX/TX transceiver statistic and state.
void	toggle_rxon_idle (void)
	Enable/disable mode RX_ON_IDL.
void	usr_radio_error (radio_error_t err)
	Callback for errors in radio module functions.
uint8_t *	usr_radio_receive_frame (uint8_t len, uint8_t *frm, uint8_t lqi, int8_t ed, uint8_t crc)
	Callback function for frame reception.
void	usr_radio_tx_done (radio_tx_done_t status)
	Callback function for TX_END IRQ.
Variables
bool	conttx
statistic_t	RdiagStat
timer_hdl_t	th_blink
const trx_param_t PROGMEM	trxp_flash
uint8_t	tx_length = 42
int8_t	verbose

---

Detailed Description

Implementation of the Radio Diagnostics Application.

---

Function Documentation

time_t blink

(

timer_arg_t

t

)

Life LED timer service routine.

void help

(

void

)

Print help for hotkeys.

int main

(

void

)

Main function of diagradio application.

This routine performs the initialization of the hardware modules and stays in a endless loop, which interpretes the commands, received from the host interface.

void send_continous

(

void

)

Send frames permanently (next frame is triggered at TX_END_IRQ).

void send_frame

(

uint8_t

seq

)

Transmit a frame with a given payload length.

void set_next_cca

(

void

)

Select CCA Mode.

void set_next_channel

(

int8_t

chaninc

)

Increment/decrement channel.

void set_next_pwr

(

int8_t

pwrinc

)

Increment/decrement TX power.

void show_statistic

(

bool

reset

)

Display RX/TX transceiver statistic and state.

void toggle_rxon_idle

(

void

)

Enable/disable mode RX_ON_IDL.

---

Variable Documentation

const trx_param_t PROGMEM trxp_flash

Initial value:

{
    chan: 13,
    txp: 0,
    cca: 1,
    edt: 11,
    clkm: 0
}

factory defaults of radio parameter