board_zgbl.h File Reference

ATZGB ZGB-LINK-{230,231,212} modules. More...

Go to the source code of this file.


#define HIF_TYPE   (HIF_UART_1)
#define HWTIMER_REG   (TCNT1)
#define HWTMR_PRESCALE   (1)
#define NO_KEYS   (1)
#define NO_LEDS   (1)
#define SLEEP_ON_KEY()   do{}while(0)
#define SLEEP_ON_KEY_INIT()   do{}while(0)
#define TIMER_INIT()
#define TIMER_IRQ_vect   TIMER1_OVF_vect
#define TIMER_POOL_SIZE   (4)

Detailed Description

ATZGB ZGB-LINK-{230,231,212} modules.

The wiring between radio transceiver and ATmega is shown below:

          AVR       AT86RF2xx
          ---       ---------
          PB4  -->  SLPTR
    XTAL1/PD6  <--  CLKM
          PD4  <--  IRQ (ICP1)
          PB5  -->  RSTN
          PB0  -->  /SEL
          PB1  -->  SCK
          PB2  -->  MOSI
          PB3  <--  MISO
          PE7  <--  DIG2 (INT7)
    For the zgb-link modules
    KEY: None
    LEDS: None
    The EVM-HOST has memory mapped Keys.
     LF: 0xe2 - 8MHz internal RC Osc.
     HF: 0x11 - without boot loader
     HF: 0x10 - with boot loader
     EF: 0xff
     LOCK: 0xef - protection of boot section
    Start at byte=0x1e000, address=0xf000, size = 4096 instructions/ 8192 bytes
Build Options

Define Documentation

#define NO_LEDS   (1)

if defined, no LEDs are connected

#define TIMER_INIT (  ) 
do{ \
        TCCR1B |= (_BV(CS10)); \
        TIMSK1 |= _BV(TOIE1); \

This documentation for µracoli was generated on Tue Apr 9 2013 by  doxygen 1.7.1