board_derfa.h File Reference

Dresden Elektronik Radio Module deRFmega128-22A001. More...

Go to the source code of this file.

Defines
#define	HIF_TYPE   HIF_UART_0
#define	HWTIMER_REG   (TCNT1)
#define	HWTIMER_TICK   ((1.0*HWTMR_PRESCALE)/F_CPU)
#define	HWTIMER_TICK_NB   (0xFFFFUL)
#define	HWTMR_PRESCALE   (1)
#define	LED_DDR   DDRG
#define	LED_MASK   (0x06)
#define	LED_NUMBER   (2)
#define	LED_PORT   PORTG
#define	LED_SHIFT   (1)
#define	LEDS_INVERSE   (0)
#define	NO_KEYS   (1)
#define	TIMER_INIT()
#define	TIMER_IRQ_vect   TIMER1_OVF_vect
#define	TIMER_POOL_SIZE   (4)
#define	TIMER_TICK   (HWTIMER_TICK_NB * HWTIMER_TICK)
#define	TRX_RESET_HIGH()   do { TRXPR |= _BV(TRXRST); } while (0)
#define	TRX_RESET_LOW()   do { TRXPR &= ~_BV(TRXRST); } while (0)
#define	TRX_SLPTR_HIGH()   do { TRXPR |= _BV(SLPTR); } while (0)
#define	TRX_SLPTR_LOW()   do { TRXPR &= ~_BV(SLPTR); } while (0)
#define	TRX_TSTAMP_REG   TCNT1

---

Detailed Description

Dresden Elektronik Radio Module deRFmega128-22A001.

Fuses/Locks:
     LF: 0xe2 - 8MHz internal RC Osc.
     HF: 0x11 - without boot loader
     HF: 0x10 - with boot loader
     EF: 0xff
     LOCK: 0xef - protection of boot section

Bootloader:
    Start at byte=0x1e000, address=0xf000, size = 4096 instructions/ 8192 bytes

radiofaro:
  LEDS: PG1, PG2

Build Options

• derfa1 : Radio Module deRFmega128-22A001

• radiofaro : wireless Ardino board
• radiofaro_v1 : wireless Ardino board

• zigduino : Logos Electromechanical LLC http://www.logos-electro.com/blog/2010/5/16/zigduino.html
• pinoccio : http://pinocc.io/

---

Define Documentation

#define TIMER_INIT

(

)

Value:

do{ \
        TCCR1B |= (_BV(CS10)); \
        TIMSK1 |= _BV(TOIE1); \
    }while(0)

#define TRX_TSTAMP_REG   TCNT1

timestamp register for RX_START event