board_rdk230.h File Reference

Atmel Radio Development Kit, AT86RF230 Radio Adapter with Atmega1281. More...

Go to the source code of this file.

Defines
#define	DDR_KEY   DDRE
#define	HIF_TYPE   (HIF_UART_1)
#define	HWTIMER_REG   (TCNT1)
#define	HWTIMER_TICK   ((1.0*HWTMR_PRESCALE)/F_CPU)
#define	HWTIMER_TICK_NB   (0xFFFFUL)
#define	HWTMR_PRESCALE   (1)
#define	INVERSE_KEYS   (1)
#define	LED_DDR   DDRE
#define	LED_MASK   (0x1c)
#define	LED_NUMBER   (3)
#define	LED_PORT   PORTE
#define	LED_SHIFT   (2)
#define	LEDS_INVERSE   (1)
#define	MASK_KEY   (0x20)
#define	PIN_KEY   PINE
#define	PORT_KEY   PORTE
#define	PULLUP_KEYS   (1)
#define	SHIFT_KEY   (5)
#define	SLEEP_ON_KEY()
#define	SLEEP_ON_KEY_INIT()   do{}while(0)
#define	SLEEP_ON_KEY_vect   INT5_vect
#define	TIMER_INIT()
#define	TIMER_IRQ_vect   TIMER1_OVF_vect
#define	TIMER_POOL_SIZE   (4)
#define	TIMER_TICK   (HWTIMER_TICK_NB * HWTIMER_TICK)

---

Detailed Description

Atmel Radio Development Kit, AT86RF230 Radio Adapter with Atmega1281.

This board wiring fits the Atmel radio development kit and/ or Dresden Elektronil RCBxxx family. hardware and compatibles.

The wiring of the radio and the ATmega is shown below:

          AVR      AT86RF230
          ---      ---------
          PB4  -->  SLPTR
    XTAL1/PD6  <--  CLKM
          PD4  <--  IRQ (ICP1)
          PB5  -->  RSTN
          PB0  -->  /SEL
          PB2  -->  MOSI
          PB3  <--  MISO
          PB1  -->  SCK

    KEY: PE5
    LEDS PE2:PE4

Fuses/Locks:
     LF: 0xe2 - 8MHz internal RC Osc.
     HF: 0x11 - without boot loader
     HF: 0x10 - with boot loader
     EF: 0xff
     LOCK: 0xef - protection of boot section

Bootloader:
    Start at byte=0x1e000, address=0xf000, size = 4096 instructions/ 8192 bytes

STK500 + STK501 + Radio board

Build Options

All rdk2xx derivates will also work with a combination of STK500 + STK501 with mega1281 + Radio Extender Board on Expand1 connector.

For UART connect PD2/PD3 on 10 pin header with RXD/TXD at STK501.

• rdk230 : RCB230 prior V3.2 / V3.3.1 (AT86RF230A)
• rdk230b : RCB230 V3.2 / RCB230 V3.3.1 (AT86RF230B)
• rdk231 : RCB231 V4.0.2 / RCB231ED V4.1.1
• rdk212 : RCB212SMA V5.3.2
• rdk232 : Radio Extender Board + STK500 + STK501

---

Define Documentation

#define SLEEP_ON_KEY

(

)

Value:

do{\
            EIMSK |= _BV(INT5);\
            set_sleep_mode(SLEEP_MODE_PWR_DOWN);\
            sleep_mode();\
            EIMSK &= ~_BV(INT5);\
        } while(0)

#define TIMER_INIT

(

)

Value:

do{ \
        TCCR1B |= (_BV(CS10)); \
        TIMSK1 |= _BV(TOIE1); \
    }while(0)